32″–75″ Extra Long Reach Single Stud TV Wall Mount (SCL03XL)

SureMount 32″–75″ Extra Long Reach Single Stud TV Wall Mount (SCL03XL)

The SureMount SCL03XL Extra Long Reach TV Wall Mount is a heavy-duty full-motion bracket designed for medium to large televisions where greater reach and positioning flexibility are required.

Its standout feature is the combination of an impressive 820mm maximum extension with a compact single-stud wall plate. Rather than being restricted by a wide mounting plate, the SCL03XL can be fixed directly to a suitable structural timber stud while allowing the television to be moved a considerable distance away from the actual mounting position.

This makes it an excellent solution for corner installations, open-plan living areas and rooms where the available wall stud doesn’t line up with the ideal TV position. The long articulating arm allows the TV to extend, retract and swivel towards different viewing areas, while folding back to approximately 70mm from the wall when not required.

The SCL03XL supports most 32″–75″ TVs weighing up to 50kg, with VESA mounting patterns from 100×100mm to 600×400mm. It also provides +5° to -12° tilt adjustment and ±3° post-installation levelling, allowing the final screen position to be fine-tuned after installation.

Essentially the larger, stronger and longer-reaching brother of the SCL02, the SCL03XL brings the flexibility of a single-stud full-motion mount to significantly larger televisions.

---

✔ Key Features

📺 Fits most 32″–75″ TVs

📏 Extra-long 820mm maximum extension

🧱 Compact single-stud wall plate for flexible installation

📐 Retracts to approximately 70mm from the wall

↔️ Up to 180° swivel for flexible viewing positions*

↕️ Screen tilt: +5° to -12°

🎯 ±3° post-installation levelling for precise screen alignment

⬜ Supports VESA patterns from 100×100mm to 600×400mm

⚖️ Maximum weight capacity: 50kg

🏠 Excellent for corner installations and open-plan living areas

🧭 Long articulating arm allows the TV to be positioned away from the wall stud

🧱 Suitable for single timber stud, solid concrete and appropriate masonry installation

🛡️ Heavy-duty steel construction for strength and durability

🔩 Includes mounting hardware and spirit level

*Actual swivel range depends on TV width and surrounding wall clearance.

---

📏 Why the 820mm Reach Matters

The SCL03XL extends up to 820mm from the wall, considerably further than a conventional full-motion TV mount.

That extra reach isn’t simply about bringing the TV closer to you. It allows the television to move far enough away from its mounting position to achieve viewing angles that would otherwise be difficult or impossible.

This can be particularly useful where:

• The TV is mounted close to a corner
• The available wall stud isn’t directly behind the desired TV position
• The television needs to face different seating areas
• The screen needs to clear furniture or architectural features
• One TV is used across an open-plan living space

When the additional reach isn’t required, the bracket folds back to approximately 70mm from the wall.

---

🧱 Single-Stud Installation

One of the biggest advantages of the SCL03XL is its compact single-stud wall plate.

Many full-motion mounts designed for larger televisions require a wide wall plate spanning two structural studs. The SCL03XL can instead be mounted directly to a single suitable structural timber stud, providing much greater freedom when choosing the mounting position.

The articulated arm then allows the television itself to be positioned away from the location of that stud.

This can be particularly useful when the structural stud doesn’t line up with where you want the centre of the television.

The bracket can also be installed onto suitable solid concrete or masonry walls using appropriate fixings.

Do not install the mount directly into plasterboard/drywall without structural support.

---

🏠 Excellent for Corner Installations

The combination of 820mm extension, single-stud mounting and extensive swivel movement makes the SCL03XL particularly well suited to corner TV installations.

Rather than permanently positioning the television diagonally across a corner, the bracket can be mounted onto a suitable structural fixing point on one wall and the television extended towards the corner when required.

The screen can then be swivelled towards the preferred viewing position and folded back towards the mounting wall when no longer needed.

This also makes the SCL03XL useful in open-plan spaces where the television may need to face different seating or dining areas at different times.

---

↔️ Full Motion Viewing Flexibility

The SCL03XL provides extensive full-motion adjustment, allowing the television to be extended, retracted and swivelled to suit different viewing positions.

The articulating arm provides up to approximately 180° of swivel movement, although the actual angle available will depend on the width of the television and surrounding wall clearance.

A smaller TV can generally swivel further before contacting the wall, while a wider television may have a reduced usable swivel range.

---

↕️ Tilt Adjustment

The SCL03XL provides approximately +5° upward and -12° downward tilt adjustment.

This allows the screen angle to be adjusted to suit the installation height and can be particularly useful when the television is positioned above normal eye level.

Downward tilt can also help improve viewing comfort and reduce reflections from windows or lighting.

---

🎯 Post-Installation Levelling

The SCL03XL includes approximately ±3° of post-installation screen levelling.

Even when a wall plate is installed carefully, a large TV can make a very small alignment error noticeable.

The levelling adjustment allows minor corrections to be made after the television has been mounted, helping achieve a straight, professional finish without having to reposition the wall plate.

---

📄 Technical Documents

📐 SCL03XL Dimensions & Measurements – SCL03XL Measurements

📘 SCL03XL Installation & User Manual – SureMount SCL03XL Instruction Manual

---

🔧 Installer’s Tip — Check TV Width for Corner Installations

The SCL03XL provides substantial swivel movement, but the width of the television determines the actual movement available.

A wide television will contact the mounting wall sooner than a smaller screen.

Before drilling:

1. Measure the overall width of the TV.

2. Locate the structural stud closest to the desired mounting position.

3. Check the distance between the stud and the corner.

4. Extend the expected TV position approximately 820mm from the mounting wall.

5. Make sure the TV will have sufficient clearance to achieve the required viewing angle.

Planning the mounting position before installation can make a significant difference to the usable swivel range.

🔧 Installer’s Tip — Allow for Cables at Full Extension

Because the SCL03XL extends up to 820mm, allow considerably more cable length than you would with a fixed or short-reach TV bracket.

HDMI, aerial, Ethernet and power cables should have enough free length to follow the television throughout its intended range of movement without becoming stretched, pinched or pulled from their connections.

Loosely route the cables along the articulating arm and test the full extension and swivel range before securing cable ties.

---

SCL02 vs SCL03XL – Which One Should You Choose?

Both the SCL02 and SCL03XL use a compact single-stud wall plate and provide full-motion adjustment, but they are designed for quite different television sizes and applications.

SCL02 – Compact Single-Stud Flexibility

✔ Best for: smaller TVs and compact installations
✔ TV size: 23″–42″
✔ Maximum extension: 514mm
✔ Maximum VESA: 200×200mm
✔ Wall mounting: single stud
✔ Standout feature: compact full-motion design for smaller televisions

Ideal when:

• You have a smaller TV
• You want a compact single-stud mounting solution
• 514mm of extension provides enough reach
• You need general full-motion adjustment without an extra-long arm

SCL03XL – Larger TVs & Extra-Long Reach

✔ Best for: medium to large TVs, corner installations and greater positioning flexibility
✔ TV size: 32″–75″
✔ Maximum extension: 820mm
✔ Maximum TV weight: 50kg
✔ Maximum VESA: 600×400mm
✔ Wall mounting: single stud
✔ Standout feature: significantly greater reach and capacity while retaining single-stud installation

Ideal when:

• You have a larger television
• You need significantly more extension
• The TV will be installed in or near a corner
• The available wall stud doesn’t line up with the ideal TV position
• You want to view the television from several different areas of a room

Quick Summary

Choose SCL02 → for smaller TVs where compact single-stud full-motion adjustment is required.

Choose SCL03XL → for larger TVs where 820mm extra-long reach, 50kg capacity and greater positioning flexibility are required.

---

❓ FAQs – SCL03XL Extra Long Reach Single Stud TV Wall Mount

1️⃣ What TV sizes does the SCL03XL support?

The SCL03XL is designed for most 32″–75″ TVs, provided the television weighs no more than 50kg and has a compatible VESA mounting pattern between 100×100mm and 600×400mm.

Always check your TV’s weight and VESA measurements rather than relying solely on screen size.

2️⃣ How far does the SCL03XL extend from the wall?

The SCL03XL extends up to approximately 820mm from the wall.

This substantial reach allows the television to be positioned well away from its mounting point and is particularly useful for corner installations and flexible viewing positions.

3️⃣ How close does the TV sit to the wall when retracted?

The mount retracts to approximately 70mm from the wall.

The final TV-to-wall distance may vary slightly depending on the shape of the television and whether spacers are required.

4️⃣ Is the SCL03XL suitable for corner mounting?

Yes.

The combination of its 820mm extension, articulated arm and compact single-stud wall plate makes the SCL03XL particularly well suited to corner TV installations.

The exact movement available will depend on the dimensions of the television and location of the mounting point.

5️⃣ Does the SCL03XL require two wall studs?

No.

The SCL03XL uses a compact single-stud wall plate, making it particularly useful where a wide two-stud mounting plate isn’t practical.

It must still be securely attached to a suitable structural timber stud or another appropriate structural mounting surface.

6️⃣ Can I install the SCL03XL directly onto plasterboard?

No.

The SCL03XL must be securely attached to appropriate structural support and should not be installed directly onto plasterboard/drywall alone.

7️⃣ How much can the TV swivel?

The bracket provides up to approximately 180° of swivel movement.

Actual swivel will depend on the width of the television and surrounding wall clearance.

8️⃣ Does the TV tilt?

Yes.

The SCL03XL provides approximately +5° upward and -12° downward tilt, allowing the viewing angle to be adjusted to suit the installation height.

9️⃣ Can I level the TV after installation?

Yes.

The SCL03XL provides approximately ±3° of post-installation levelling adjustment, allowing small corrections to be made after the TV has been fitted.

🔟 What VESA mounting patterns does it support?

The SCL03XL supports VESA mounting patterns from 100×100mm up to 600×400mm, including a wide range of intermediate configurations.

Always check the horizontal and vertical mounting-hole spacing on your television before purchasing.

1️⃣1️⃣ How much weight can the SCL03XL support?

The maximum supported television weight is 50kg.

The weight limit should never be exceeded regardless of the TV’s screen size.

1️⃣2️⃣ Can the TV be positioned away from the wall stud?

Yes.

This is one of the major advantages of the SCL03XL.

The bracket can be securely mounted to a structural timber stud while the 820mm articulated arm allows the television to be repositioned horizontally away from the actual mounting location.

1️⃣3️⃣ What is the difference between the SCL02 and SCL03XL?

The SCL03XL is essentially the larger, stronger and longer-reaching brother of the SCL02.

Both provide single-stud full-motion mounting, but the SCL03XL supports significantly larger TVs, VESA patterns up to 600×400mm, televisions weighing up to 50kg, and extends up to 820mm from the wall.