SF03 40″-60″+ TV Wall Mount

SureMount 40″–60″+ Fixed TV Wall Mount (SF03)

The SureMount SF03 is a strong, reliable fixed TV wall mount designed for medium to large screens from 40″ to 60″+. Supporting VESA patterns from 200×200 mm up to 700×400 mm, it fits almost all major TV brands within its size and weight range.

Built specifically for New Zealand homes, the SF03 features an extra-wide 810 mm backplate engineered to span 600 mm timber or steel wall studs, ensuring a safe, solid, and stable installation. Your TV sits close to the wall in a clean, low-profile position, while still allowing a 30 mm cable gap for tidy wiring.

Installer-friendly and universal in design, the SF03 includes a complete mounting kit for both the wall and the TV, making installation quick and straightforward.

---

🟨 Key Features

✔ Fits most 40″–60″+ TVs (up to 60 kg)
✔ Supports VESA 200×200 mm up to 700×400 mm
✔ 810 × 230 mm backplate — ideal for 600 mm timber or metal studs
✔ Low-profile design with a 30 mm cable gap
✔ Universal fit with a full mounting kit included
✔ Strong, stable fixed mount for a secure installation
✔ Extendable to VESA 800×800 mm using the SureMount SADAPTOR8
✔ Compatible with metal wall studs when correct fixings are used

Need a slimmer option? Also compatible with ultra-slim SureMount brackets such as SFSS03 (24 mm) or SL1 (10 mm)

---

🔧 Installer’s Tip — Improve Viewing Angle and Cable Access

Professional installers often add a small spacer or washer behind the TOP mounting holes (on the TV side of the bracket).
This creates a very slight tilt forward — usually only a few degrees — but it has three big advantages:

• Better viewing angle:
If the TV is mounted a little higher than eye level (common in lounges, bedrooms, or above cabinets), this gentle forward angle improves visibility and reduces glare.

• Better cable access & connector protection:
Ultra-slim mounts can sit very close to bottom HDMI and power ports.
A minor forward tilt gives:
– extra room for HDMI/power cables,
– less pressure on connectors,
– easier installation when plugging in new devices.

• Cleaner overall finish:
By relieving strain and keeping cables routed naturally, the TV sits more comfortably on the bracket and maintains an even, vertical look from the front.

This is a standard, safe, and widely used installer technique — especially helpful with flat to wall mounts like the SF03,

Installation Manual for SF03 Fixed TV Wall Mount

SF03 Manual

Measurements for SF03 Fixed TV Wall Mount

SF03 Measurements

FAQ’s — SureMount SF03 Fixed TV Wall Mount

1️⃣ How do I know whether the SF03 will work with my TV?

Check two things:

• Weight: Your TV must be 60 kg or less

• VESA pattern: Must be between 200×200 and 700×400 mm

If both match, the SF03 will fit your TV.

---

2️⃣ Should I choose a fixed mount or a tilt mount?

Choose a fixed mount like the SF03 if you want:

• The TV as close to the wall as possible

• A clean, minimal side profile

• A strong bracket that does not move

Choose a tilt mount if you need:

• Easier access to rear ports

• The ability to mount the TV higher

• Downward tilt to improve the viewing angle

---

3️⃣ Does the SF03 work with metal wall studs?

Yes — the SF03 is designed for both timber and metal 600 mm studs, which are common in NZ homes and commercial buildings.

Many people worry about metal studs because:

• They are thinner than timber

• Standard screws do not work without correct fixings

• Incorrect installation reduces load capacity

When installed using the correct hardware, the SF03 is strong and safe on metal studs. If unsure, using a qualified installer is recommended.

---

4️⃣ How much space is behind the TV once mounted?

The SF03 has a 30 mm cable gap, allowing:

• Power and HDMI routing

• Room for wall plates or tidy cable management

• Improved airflow

If you want an ultra-slim mount, consider the SFSS03 (24 mm) or SL1 (10 mm).

---

5️⃣ What comes in the box?

The SF03 includes:

• Full hardware kit for both the wall and TV

• Spacers, bolts, washers, and fixing screws

• Installation instructions