SureMount 46″–85″+ Fixed TV Wall Mount (SF04)
The SureMount SF04 is a heavy-duty, fixed TV wall mount designed for large screens from 46″ up to 85″+. With support for VESA patterns from 300×300 mm to 800×400 mm, it fits nearly all major TV brands — including wider VESA layouts commonly found on modern 65″–85″ panels.
Engineered for New Zealand homes, the SF04 features an extra-wide 960 mm backplate built to span 600 mm timber or metal studs, ensuring a safe and stable installation whether you have wooden or steel framing. Once installed, your TV sits close to the wall with a sleek, low-profile appearance, while still offering a 30 mm cable gap for tidy cable management.
The SF04 ships with a complete mounting hardware kit and is designed for quick, universal installation.
🟨 Key Features
✔ Fits most 46″–85″+ TVs
✔ Supports VESA 300×300 mm up to 800×400 mm
(Extendable to 800×800 mm using SADAPTOR8 extension arms)
✔ 100 kg weight capacity — suitable for very large screens
✔ Wide 960 × 230 mm backplate — ideal for 600 mm timber or metal studs
✔ 30 mm cable gap for clean wiring and ventilation
✔ Low-profile fixed mount for a clean, close-to-wall finish
✔ Includes full mounting kit for wall and TV installation
✔ Universal design — compatible with most major TV brands
🔧 Installer’s Tip — Improve Viewing Angle and Cable Access
Professional installers often add a small spacer or washer behind the TOP mounting holes (on the TV side of the bracket).
This creates a very slight tilt forward — usually only a few degrees — but it has three big advantages:
• Better viewing angle:
If the TV is mounted a little higher than eye level (common in lounges, bedrooms, or above cabinets), this gentle forward angle improves visibility and reduces glare.
• Better cable access & connector protection:
Ultra-slim mounts can sit very close to bottom HDMI and power ports.
A minor forward tilt gives:
– extra room for HDMI/power cables,
– less pressure on connectors,
– easier installation when plugging in new devices.
• Cleaner overall finish:
By relieving strain and keeping cables routed naturally, the TV sits more comfortably on the bracket and maintains an even, vertical look from the front.
This is a standard, safe, and widely used installer technique — especially helpful with flat to wall mounts like the SF04
Installation Manual For SF04 Fixed TV Wall Mount
Measurements For SF04 Fixed TV Wall Mount
FAQ’s — SureMount SF04 Fixed TV Wall Mount
1️⃣ How do I know whether the SF04 will work with my TV?
Check two things:
-
Weight: Your TV must be 100 kg or less
-
VESA pattern: Must be between 300×300 and 800×400 mm
(or up to 800×800 mm with the SADAPTOR8 extension arms)
If both match, your TV is compatible with the SF04.
2️⃣ Should I choose a fixed mount or a tilt mount?
Choose a fixed mount like the SF04 if you want:
-
The TV as close to the wall as possible
-
A clean, minimalist side profile
-
A strong, stable bracket for large screens
Choose a tilt mount if you need:
-
Easier access to rear connections
-
To mount the TV higher (e.g., above fireplaces)
-
Downward tilt to improve viewing angles
3️⃣ Does the SF04 work with metal wall studs?
Yes — it is designed for both timber and metal 600mm studs commonly used in New Zealand homes.
However, people often worry about fixing into steel studs because:
-
Steel studs are thinner than timber
-
Normal screws are not suitable without correct fixings
-
Incorrect installation may lead to reduced load capacity
When installed correctly, the SF04 is strong and safe on metal studs.
If unsure, SureMount recommends using a qualified installer.
4️⃣ How much space is behind the TV once mounted?
The SF04 provides a 30 mm cable gap, allowing:
-
Power and HDMI cable routing
-
Easy access during setup
-
Increased airflow behind the TV
If you want an ultra-slim 24 mm profile, consider the SFSS05.
5️⃣ What comes in the box?
The SF04 includes:
-
Full mounting kit for both wall and TV attachment
-
Spacers, bolts, washers, and fixing hardware
-
Installation instructions














Reviews
There are no reviews yet.