How do I know whether the SF04 will work with my TV?

Check two things: Weight: Your TV must be 100 kg or less VESA pattern: Must be between 300×300 and 800×400 mm (or up to 800×800 mm with the SADAPTOR8 extension arms) If both match, your TV is compatible with the SF04.

Should I choose a fixed mount or a tilt mount?

Choose a fixed mount like the SF04 if you want: The TV as close to the wall as possible A clean, minimalist side profile A strong, stable bracket for large screens Choose a tilt mount if you need: Easier access to rear connections To mount the TV higher (e.g., above fireplaces) Downward tilt to improve viewing angles

Does the SF04 work with metal wall studs?

Yes — it is designed for both timber and metal 600mm studs commonly used in New Zealand homes. However, people often worry about fixing into steel studs because: Steel studs are thinner than timber Normal screws are not suitable without correct fixings Incorrect installation may lead to reduced load capacity When installed correctly, the SF04 is strong and safe on metal studs. If unsure, SureMount recommends using a qualified installer.

How much space is behind the TV once mounted?

The SF04 provides a 30 mm cable gap, allowing: Power and HDMI cable routing Easy access during setup Increased airflow behind the TV If you want an ultra-slim 24 mm profile, consider the SFSS05.

What comes in the box?

The SF04 includes: Full mounting kit for both wall and TV attachment Spacers, bolts, washers, and fixing hardware Installation instructions

SureMount SF04 Fixed TV Wall Mount for 46

SureMount 40″–80″ Fixed TV Wall Mount (SF04)

The SureMount SF04 Fixed TV Wall Mount is a heavy-duty, low-profile bracket designed for medium to large TVs, offering a clean and secure wall-mounting solution.

Ideal for living rooms, commercial installations, and larger screen setups, the SF04 features a wide backplate for flexible mounting across standard stud spacing. The strong steel construction supports TVs up to 80kg, while the 30mm cable gap provides space for cable routing without compromising the slim, tidy appearance.

Simple, durable, and easy to install, the SF04 is a reliable fixed mount for larger TV installations.

🟨 Key Features

✔ Fits most 40″–80″ TVs
✔ Supports VESA 200×200mm up to 800×400mm
✔ Maximum weight capacity: 80kg
✔ Wide backplate for improved mounting flexibility
✔ 30mm cable gap for easy cable management
✔ Clean, low-profile fixed mount design
✔ Strong steel construction for durability
✔ Includes full mounting kit for wall and TV installation

40″–80″ Fixed TV Wall Mount (SF04) Measurements

SF04-Measurements

40″–80″ Fixed TV Wall Mount (SF04) Product Manual

SF02 SF03 SF04 Manual

🔧 Installer’s Tip — Improve Viewing Angle and Cable Access

Professional installers often add a small spacer or washer behind the TOP mounting holes (on the TV side of the bracket).

This creates a very slight forward tilt — usually only a few degrees — but it has three big advantages:

• Better viewing angle:
If the TV is mounted slightly higher than eye level, this gentle forward angle improves visibility and reduces glare.

• Better cable access & connector protection:
Even with a 30mm gap, some TVs have rear-facing HDMI and power ports that can sit tight against the wall.
A slight forward tilt provides:
– extra room for cables,
– less pressure on connectors,
– easier installation and future access.

• Cleaner overall finish:
By reducing strain on cables, the TV sits more naturally and maintains a neat, level appearance.

This is a standard, safe, and widely used installer technique, especially helpful with fixed mounts like the SF04.

❓ FAQs – 40″–80″ Fixed TV Wall Mount (SF04)

1️⃣ What TV sizes does this mount support?

The SF04 is designed for 40″–80″ TVs, with a maximum weight of 80kg.

2️⃣ How close to the wall does the TV sit?

The mount provides a 30mm gap from the wall, offering a balance between a slim profile and cable access.

3️⃣ What VESA patterns are supported?

The mount supports 200×200mm up to 800×400mm, covering most larger TVs.

4️⃣ Is this mount suitable for standard wall studs?

Yes.
The wide backplate provides flexibility for mounting across standard wall stud spacing.

5️⃣ Can I adjust the TV position after installation?

This is a fixed mount, so it does not include tilt or swivel adjustment.
Proper positioning during installation will ensure the TV is correctly aligned.

6️⃣ Should I choose a fixed or tilt mount?

A fixed mount like the SF04 provides a clean, low-profile finish.
If you need easier cable access or plan to mount the TV higher than eye level, a tilt mount may be more suitable.

Weight	3 kg
Dimensions	100 × 25 × 6 cm
Screen Size	46" to 85"+
Mounting VESA	Maximum VESA 800x400mm Can be extended to 800x800mm with SADAPTOR8 extension arms
Maximum Weight Capacity	100 Kgs
Distance From Wall	30mm
Bracket Size	Large (41" – 60"), X-Large (Over 60")