SureMount 23″–40+″ Slimline Flat-to-Wall TV Mount (SFSS01)
The SureMount® SFSS01 is one of the slimmest flat-to-wall TV brackets available — sitting just 24 mm from the wall. Designed for modern 23″–40″+ LCD and LED TVs, this ultra-slim bracket creates a clean, minimalist, near-flush appearance that makes the TV look almost built into the wall.
The sliding, adjustable arms make centering your TV simple, even when studs or fixing points aren’t perfectly aligned. Strong, secure, and installer-friendly, the SFSS01 includes a locking bar for added safety and comes with a full mounting kit for both wall and TV attachment.
It can also be used for portrait mounting when paired with the SADAPTOR8 Extension Arms, giving additional vertical mounting height when needed.
🟨 Key Features
✔ Fits most 23″–40+″ TVs
✔ Supports VESA patterns from 100×100 mm to 400×300 mm
✔ Strong steel construction with a 45 kg weight capacity
✔ Slim 24 mm profile for a clean, modern look
✔ Sliding arms for easy TV centering
✔ Locking bar included for added security
✔ Complete mounting kit for wall and TV installation
✔ Supports portrait mounting with SADAPTOR8 Extension Arms
🔧 Installer’s Tip — Improve Viewing Angle and Cable Access
Professional installers often add a small spacer or washer behind the TOP mounting holes (on the TV side of the bracket).
This creates a very slight forward tilt — usually only a few degrees — but it delivers three major benefits:
• Better viewing angle
When the TV is mounted slightly higher than eye level (common in bedrooms, lounges, kitchens, and above cabinets), this gentle forward angle noticeably improves visibility and reduces glare.
• Better cable access & connector protection:
Ultra-slim mounts sit very close to the wall, which can make bottom HDMI/power ports hard to reach.
A tiny forward tilt provides:
– extra room for HDMI/power cables
– less strain on connectors
– easier access when adding devices like streaming sticks or soundbars
• Cleaner overall finish:
Relieving pressure on the cables allows the TV to sit comfortably and evenly against the wall — maintaining a straight, tidy, professional look from the front.
This is a standard, safe, and widely used installer technique, especially helpful with slim fixed mounts like the SFSS01, SFSS03, SFSS05, SF03, and SF04.
Additionally, this bracket supports portrait TV mounting when used with the SADAPTOR8 Extension Arms, allowing for greater height adjustment if needed.
Product Manual for SFSS01 Slimline Flat-to-Wall TV Mount
Measurements for SFSS01 Slimline Flat-to-Wall TV Mount
FAQ’s — SureMount SFSS01 Slimline Flat-to-Wall TV Mount
1️⃣ How do I know whether the SFSS01 will work with my TV?
Check two things:
Weight: Your TV must be 45 kg or less
VESA pattern: Must be 100×100 to 400×300 mm
If both match, the SFSS01 will fit your TV.
2️⃣ Should I buy a tilt mount or a flat-to-wall fixed mount?
Choose a flat mount like the SFSS01 if you want:
-
the slimmest, most seamless look
-
the TV close to the wall
-
a minimalist “picture-frame” appearance
Choose a tilt mount if you need:
-
easier access to ports
-
compensation for TVs mounted higher than eye level
-
tilt to improve viewing angles
3️⃣ Can the SFSS01 be used for portrait mounting?
Yes — when paired with the SADAPTOR8 Extension Arms, you can extend the vertical VESA reach and mount your TV in portrait orientation.
4️⃣ What comes in the box?
You receive:
-
SFSS01 slimline TV mount
-
Locking bar
-
Full wall-mounting hardware
-
TV mounting bolts, washers, and spacers
-
Installation instructions


















Reviews
There are no reviews yet.