40″–55″ Super Slim Fixed TV Wall Mount (SL1)

SureMount 40″–55″ Super Slim Fixed TV Wall Mount (SL1)

The SureMount SL1 is an ultra-slim fixed TV wall mount designed to position your TV just 10mm from the wall, creating a true picture-frame finish.

Designed for modern ultra-thin TVs, the SL1 delivers a minimalist, near-invisible installation, where the bracket virtually disappears behind the screen.

With a spring-loaded locking system, lateral shift adjustment, and open backplate design, it combines clean aesthetics with practical installation features.

---

🟨 Key Features

📺 Fits Most 40″–55″ TVs

📐 VESA Compatibility: 100×100 to 600×400

📏 Ultra Slim Profile – Only 10mm from Wall
One of the slimmest mounts available.

🏋️ Maximum Load: 60kg
Suitable for most TVs in this size range.

🔒 Spring-Loaded Locking System
Quick, secure TV mounting.

🔓 Built-In Safety Release
Allows easy removal when required.

🔄 Lateral Shift Adjustment
Enables perfect centring after installation.

🧵 Open Backplate Design
Improves access for cables and power.

🛠 2mm Cold-Rolled Steel Construction
Strong and durable.

📦 Full Mounting Kit Included

---

⚠️ Compatibility Note

• Recommended TV size: 40″–55″
• VESA: 100×100 to 600×400
• Maximum weight: 60kg

👉 Fixed position mount (no tilt or swivel)
👉 Designed for ultra-slim, flush wall installations

---

📄 Technical Documents

SL1 Measurements: SL1 Measurements

SL1 Manual: SL1 Manual

---

🔧 Installer’s Tip — Ultra-Slim Installs & Cable Clearance

With ultra-slim mounts like the SL1 (10mm from wall), cable management becomes critical.

Professional installers often add a small spacer or washer behind the top mounting holes (on the TV side of the bracket).

This creates a very slight forward tilt — usually only a few degrees — but has major benefits:

• Better viewing angle
If mounted slightly above eye level, this improves visibility and reduces glare.

• Improved cable access & connector protection
At 10mm depth, rear ports can be extremely tight.
A slight tilt provides:
– extra room for HDMI and power cables
– less strain on connectors
– easier installation and future access

• Cleaner overall finish
Reduces cable pressure and helps maintain a natural, level look.

👉 This is a standard and widely used installer technique for ultra-slim mounts.

---

❓ FAQs – 40″-55″ Super Slim Fixed TV Wall Mount (SL1)

1️⃣ Will this work with my TV?

Check:

• Your TV is 40″–55″
• VESA between 100×100 and 600×400
• Weight under 60kg

---

2️⃣ How close does the TV sit to the wall?

Just 10mm from the wall, creating a near picture-frame finish.

---

3️⃣ Can I centre the TV after installation?

Yes.
The lateral shift feature allows left/right adjustment.

---

4️⃣ Can I remove the TV easily?

Yes.
The spring-loaded locking system includes a safety release for easy removal.

---

5️⃣ Will cables fit behind the TV?

They can, but due to the ultra-slim design:

• angled connectors or
• a slight spacer tilt

are often recommended.

---

6️⃣ Should I choose fixed or tilt?

Choose SL1 (fixed) if you want:

• the slimmest possible finish
• a clean, modern look

Choose tilt if you need easier cable access or angle adjustment.