SureMount 65″–95″ Slimline Flat To Wall TV Mount (SFSS05)
The SureMount® SFSS05 is a premium, ultra-slim fixed TV mount designed for extra-large screens from 65″ to 95″. Sitting just 24 mm off the wall, it delivers a sleek, flush-mounted look ideal for modern LED and LCD displays.
Engineered for strength, the SFSS05 features a 1200 mm extra-wide backplate that offers exceptional mounting flexibility. The outermost mounting holes are spaced 1155 mm apart, allowing installers to fix into three wall studs by screwing on an angle. This technique ensures maximum stability and superior load distribution — essential for today’s heavier and wider big-screen TVs.
Sliding mounting arms make centring the TV straightforward, and the included locking bar adds extra security once the TV is installed.
🟨 Key Features
✔ Fits most 65″–95″ TVs
✔ Supports VESA 100×100 mm up to 1200×800 mm
✔ Super-slim 24 mm wall gap for a near-flush finish
✔ 1200 mm wide backplate with 1155 mm hole spacing — allows fixing into three studs when screwing on an angle
✔ Designed for NZ’s 600 mm stud spacing (timber or steel studs)
✔ 100 kg weight capacity
✔ Sliding arms for easy centring
✔ Locking bar included for security and anti-theft applications
✔ Full mounting kit for wall and TV attachment
Compatible accessories:
• SCL11XL-HD — recommended alternative for large-screen cantilever mounting
🔧 Installer’s Tip — Improve Viewing Angle & Cable Access
Professional installers often add a small spacer or washer behind the TOP TV-side mounting holes.
This creates a subtle forward tilt (just a few degrees), providing three major benefits:
• Better viewing angle
Ideal when the TV is mounted slightly higher than eye level (common in lounges or bedrooms).
• Improved cable clearance
Ultra-slim mounts can sit very close to bottom HDMI/power ports.
A slight forward tilt gives:
– more room for plugs,
– less strain on connectors,
– easier cable changes in the future.
• Cleaner overall finish
Relieves downward pressure and helps the TV sit more naturally against the bracket.
This is a widely used, safe installer technique — especially helpful on slim mounts like the SFSS05, SFSS03, SFSS01, and SL1.
Product Manual for SFSS05 Slimline Flat To Wall TV Mount
Measurements for SFSS05 Slimline Flat To Wall TV Mount
FAQ’s — SureMount SFSS05 Slimline Flat To Wall TV Mount
1️⃣ How do I know if the SFSS05 will work with my TV?
Check two things:
• Weight: TV must be 100 kg or less
• VESA pattern: Must be between 100×100 mm and 1200×800 mm
If your TV meets both, it is compatible with the SFSS05.
2️⃣ Should I choose a slim fixed mount or a tilt mount?
Choose the SFSS05 (fixed) if you want:
-
The TV as close to the wall as possible
-
A clean, minimalist look
-
Maximum stability for very large TVs
Choose a tilt mount if you need:
-
Easier access to rear ports
-
Better viewing angle when mounting higher
-
Slight downward tilt to reduce glare
3️⃣ Can the SFSS05 be mounted across three wall studs?
Yes.
The SFSS05 has 1155 mm hole spacing, which allows installers to:
-
Hit three studs
-
Even when studs are not perfectly aligned
-
By screwing on an angle into the outer studs
This significantly increases mounting strength for extra-large screens.
4️⃣ How far does the SFSS05 sit from the wall?
Just 24 mm — one of the slimmest profiles available for screens up to 95″.
If you want an even slimmer 10 mm profile, consider the SL1.
5️⃣ What comes in the box?
The SFSS05 includes:
-
Full wall-mount hardware kit
-
TV mounting bolts
-
Spacers & washers
-
Locking bar
-
Installation instructions














Richard (verified owner) –
The bracket is ideal for my TV. It is relatively slim with the back of the TV about 25mm from the wall.
Greg (verified owner) –
Great Product. works well, nice and solid. Thanks for the helpful advise