SureMount 32″–75″ Motorised Above Fireplace TV Wall Mount – 40kg (SMWM40)

SureMount 32″–75″ Motorised Above Fireplace TV Wall Mount – 40kg (SMWM40)

The SureMount SMWM40 Motorised Above Fireplace TV Wall Mount is designed to solve one of the biggest problems with mounting a television above a fireplace — the screen often ends up much higher than the ideal viewing position.

At the touch of a button, the SMWM40 automatically moves the television down and forward from the wall, providing up to 450mm of vertical drop to bring the screen closer to a comfortable viewing height. When you’ve finished watching, simply raise the television back to its original position.

A wireless remote control with programmable memory makes everyday operation easy, allowing you to save and return to your preferred viewing position without manually adjusting the TV each time.

Designed for most 32″–75″ televisions weighing up to 40kg, the SMWM40 supports VESA mounting patterns from 100×100mm through to 600×400mm. Once lowered, the screen can also be swivelled and tilted to fine-tune the viewing angle.

Unlike many above-fireplace mounts, the SMWM40 uses a top-hung TV mounting arrangement, helping the television conceal more of the lifting mechanism when returned to its raised position for a cleaner appearance.

The SMWM40 also provides two flexible installation options. The main mechanism can be mounted directly to a suitable single structural timber stud, or the supplied mounting extension arms can be fitted to span multiple studs where the desired TV position doesn’t line up with a single stud.

---

🪝 Top-Hung Design Helps Conceal the Mount

One of the important design differences with the SMWM40 is its top-hung TV mounting arrangement.

The television hangs from the lower section of the lifting mechanism, allowing more of the main structure to sit behind the television when the TV is returned to its raised position.

This can provide a much cleaner appearance than designs where a significant portion of the mechanism extends below the television when closed.

Exactly how much of the bracket is concealed will depend on the physical height of your television and the position of its VESA mounting holes.

When the television is lowered into its viewing position, part of the lifting mechanism will normally become visible above and behind the TV. This is a normal characteristic of the design.

---

⬇️ Lower Your TV by up to 450mm

The motorised mechanism provides up to 450mm of vertical movement, allowing a television mounted above a fireplace, mantel or other high position to be brought significantly closer to normal eye level.

As the mechanism operates, the television moves downward and forward from the wall, providing the clearance required to move past a mantel or fireplace surround.

When you’ve finished watching, simply raise the television back towards its original high-mounted position.

---

🎮 Remote Controlled with Memory Position

There is no need to manually pull down or lift the television.

The supplied wireless remote provides:

⬆️ Up – raises the television

⏹️ Stop – stops movement at the desired position

⬇️ Down – lowers the television

💾 Memory – stores your preferred viewing position

The memory function is particularly useful for everyday viewing, allowing the TV to return to your preferred position without having to manually find the same height each time.

---

↔️ Fine-Tune Your Viewing Angle

The SMWM40 doesn’t just change the height of the television.

Once lowered, the screen can also be adjusted to better suit your seating position.

↔️ Up to approximately 25° left/right swivel

↕️ Approximately +7° upward / -14° downward tilt

This additional adjustment is particularly useful in open-plan living areas or rooms where viewers aren’t always seated directly in front of the television.

---

🧱 Two Flexible Wall Mounting Options

The SMWM40 has been designed to accommodate different wall structures and TV positions, with two mounting configurations available for timber-framed walls.

🪵 Single-Stud Installation

Where a suitable structural timber stud is correctly positioned, the main SMWM40 mechanism can be secured directly to a single stud.

This provides a compact installation without requiring the wider mounting extension arms and can help keep more of the mounting hardware concealed behind the television.

↔️ Multi-Stud Installation with Extension Arms

Where the desired TV position doesn’t conveniently line up with a single stud, the supplied horizontal mounting extension arms can be fitted to the main mechanism.

These provide additional fixing positions across the wall and accommodate common 400mm, 450mm and 600mm stud spacing.

This gives the installer considerably more freedom to position the television where it is required rather than having the final TV location dictated by the position of a single wall stud.

The SMWM40 can also be installed onto suitable solid concrete or masonry walls using appropriate fixings.

⚠️ The mount must always be secured to suitable structural support and must not be fixed directly to plasterboard/drywall alone.

---

✔ Key Features

📺 Fits most 32″–75″ TVs

⚖️ Maximum weight capacity: 40kg

⬜ Supports VESA patterns from 100×100mm to 600×400mm

⚙️ Motorised lowering and raising at the touch of a button

⬇️ Up to 450mm vertical drop for a more comfortable viewing height

🎮 Wireless remote control for convenient operation from your seating position

💾 Programmable memory position for quick return to your preferred viewing height

🔥 Ideal for above-fireplace, mantel and other high-wall TV installations

🪝 Top-hung TV mounting design helps conceal more of the mechanism when the television is raised

↔️ Up to 25° left/right swivel for flexible viewing angles

↕️ Approx. +7° / -14° tilt adjustment

🪵 Single-stud mounting option – mount directly to a suitably positioned structural timber stud

↔️ Multi-stud mounting option – supplied extension arms accommodate common 400mm, 450mm and 600mm stud spacing

🎯 Flexible TV positioning – extension arms help achieve the desired TV position even when wall studs aren’t ideally located

🧱 Suitable for appropriate solid concrete and masonry walls

🛡️ Heavy-duty steel construction for strength and stability

🔩 Includes mounting hardware, extension arms and wireless remote control

---

📄 Technical Documents

📐 SMWM40 Dimensions & Measurements – SMWM40-Measurements-Full

📘 SMWM40 Installation & User Manual – SureMount SMWM40 Instruction Manual

🎥 SMWM40 Product Demonstration Video –

---

🔧 Installer’s Tips

📍 Plan Both the Raised and Lowered TV Positions

Don’t calculate the mounting height based only on where you want the television to sit when raised.

The SMWM40 provides approximately 450mm of vertical travel, so both the raised position and lowered viewing position should be considered before drilling.

Also check that the television will safely clear the mantel, fireplace surround, cabinetry and any other obstacles throughout the complete movement.

---

📺 Check the Position of the TV’s VESA Holes

Not all televisions have their VESA mounting holes positioned in the centre of the screen.

Some are centred, while others are positioned higher or lower on the rear of the television.

With the SMWM40 this affects:

📏 The final mounting height of the television

⬆️ Where the TV sits when fully raised

⬇️ The final viewing height when lowered

👀 How much of the lifting mechanism is concealed behind the television

If hiding as much of the mechanism as possible is important, check the TV dimensions and VESA position before determining the final wall mounting height.

---

🪝 Consider Bracket Visibility

The top-hung design helps a compatible television conceal more of the SMWM40 mechanism while in its raised position.

However, the lifting mechanism will normally become visible above the television as the TV is lowered.

This is normal and should be considered when planning the finished installation.

---

🧱 Choose the Best Mounting Configuration

Before installing the SMWM40, determine whether a single-stud or extension-arm installation is best for the particular wall and desired TV position.

If a suitable structural stud is located exactly where required, the compact single-stud configuration may provide the neatest solution.

If the available stud doesn’t align with the desired TV position, fitting the mounting extension arms allows the bracket to pick up additional studs at common 400mm, 450mm or 600mm spacing.

This means the location of the wall framing doesn’t necessarily have to dictate the centre position of the television.

---

🔥 Check Fireplace Clearances and Heat

Mounting a television above a fireplace requires more consideration than simply finding the correct mounting height.

🔥 Check the fireplace manufacturer’s required clearances

🌡️ Consider the temperature around the television when the fireplace is operating

📺 Check the TV manufacturer’s installation and operating temperature requirements

📏 Ensure the TV clears the mantel or fireplace surround throughout the full movement of the mount

The SMWM40 can improve the TV’s viewing position, but it does not override the installation or clearance requirements of either the fireplace or television manufacturer.

---

🔌 Allow Plenty of Cable Movement

Because the television moves both downward and outward from the wall, cable management needs to be carefully considered.

🔌 Allow sufficient cable length

➰ Provide a smooth cable loop where required

⚠️ Avoid tight bends or tension on connectors

✋ Make sure cables cannot become trapped in the moving mechanism

↕️ Test the complete movement before securing your final cable management

Run the mount through several complete up-and-down cycles before finishing the installation to ensure cables move freely throughout the entire range.

---

⚖️ SMWM40 vs SMF600 – Which One Should You Choose?

Both the SMWM40 and SMF600 are designed to solve the same basic problem — a television mounted above a fireplace or high on a wall that needs to be brought down to a more comfortable viewing position.

The major difference is how they achieve it.

SMWM40 – Motorised Convenience

✔ Best for: regular use, convenience and effortless adjustment

✔ Operation: fully motorised raising and lowering

✔ Control: wireless remote control

✔ Memory: programmable preferred viewing position

✔ Installation: single-stud or multi-stud using extension arms

✔ Standout feature: automatically lowers and raises the television at the touch of a button

Ideal when:

• The TV will regularly move between raised and lowered positions
• You want to operate the mount from your seating position
• You don’t want to manually pull down or lift the television
• You want to save and return to a preferred viewing position
• Concealing as much of the mechanism as possible when raised is important

SMF600 – Simple Manual Operation

✔ Best for: simple, manually operated above-fireplace installations

✔ Operation: manual pull-down and return

✔ Control: manually reposition the television

✔ Motor or power required: no

✔ Standout feature: simple mechanical solution without electrical operation

Ideal when:

• The television will only occasionally be lowered
• You prefer a simple manual mechanism
• Remote control isn’t required
• You don’t need a programmable viewing position
• You want an above-fireplace solution without requiring power for the mount

Quick Summary

Choose SMWM40 → for motorised convenience, remote control, memory positioning and frequent adjustment.

Choose SMF600 → for a simple manual above-fireplace solution without requiring electrical operation.

---

❓ FAQs – 32″–75″ Motorised Above Fireplace TV Wall Mount (SMWM40)

1️⃣ What is the SMWM40 designed for?

The SMWM40 is designed for situations where a television needs to be installed higher than the ideal viewing position, particularly above fireplaces, mantels and cabinetry.

It allows the television to be automatically lowered for viewing and raised again when finished.

2️⃣ How far does the TV lower?

The SMWM40 provides up to approximately 450mm of vertical drop.

The final position of the screen will also depend on the physical dimensions of your television and the location of its VESA mounting holes.

3️⃣ Is the SMWM40 fully motorised?

Yes.

The raising and lowering movement is motorised and controlled using the supplied wireless remote. There is no need to manually pull the television down or lift it back up.

4️⃣ What controls are available on the remote?

The supplied remote provides Up, Stop, Down and Memory functions, allowing you to control the television’s movement and save a preferred viewing position.

5️⃣ What does the memory function do?

The memory function allows you to save your preferred TV position.

This is particularly useful when the television is regularly lowered to the same viewing height, as the mount can return to that position without having to manually find it each time.

6️⃣ Will the SMWM40 be hidden behind my TV?

The SMWM40 uses a top-hung TV mounting design, which helps position more of the lifting mechanism behind the television when it is raised.

Exactly how much is concealed depends on the height of your television and the location of its VESA mounting holes.

7️⃣ Can you see the mechanism when the TV is lowered?

Normally, yes.

As the television moves down and forward, part of the motorised lifting mechanism will generally become visible above and behind the TV.

This is a normal characteristic of this style of mount.

8️⃣ What size TVs does the SMWM40 fit?

The SMWM40 is designed for most 32″–75″ TVs, provided the television weighs no more than 40kg and has a compatible VESA mounting pattern.

Always check TV weight and VESA dimensions rather than relying solely on screen size.

9️⃣ What is the maximum TV weight?

The SMWM40 supports televisions weighing up to 40kg.

The weight limit should not be exceeded regardless of the television’s screen size.

🔟 What VESA mounting patterns does it support?

The SMWM40 supports VESA mounting patterns from 100×100mm through to 600×400mm, covering a wide range of medium and large televisions.

1️⃣1️⃣ Can I swivel the TV left and right?

Yes.

The television can swivel up to approximately 25° left or right, allowing the screen to be angled towards different seating positions.

The actual usable angle may vary depending on TV size and surrounding clearance.

1️⃣2️⃣ Can I tilt the television?

Yes.

The SMWM40 provides approximately +7° upward and -14° downward tilt adjustment, allowing the final viewing angle to be fine-tuned.

1️⃣3️⃣ Does the SMWM40 have to be mounted to a single wall stud?

No.

The SMWM40 provides two installation options for timber-framed walls.

Where a suitable structural stud is correctly positioned, the main motorised mechanism can be mounted directly to a single timber stud.

Alternatively, the supplied mounting extension arms can be fitted to span multiple studs, accommodating common 400mm, 450mm and 600mm stud spacing.

This provides considerably more installation flexibility when the wall framing doesn’t line up with the desired TV position.

1️⃣4️⃣ Why would I use the mounting extension arms?

The extension arms are particularly useful when a structural stud isn’t located where you want the centre of the mount.

By spanning multiple studs, the extension arms provide additional fixing positions and allow the SMWM40 to be located more appropriately for the television and fireplace rather than simply following the position of a single stud.

1️⃣5️⃣ Can it be mounted directly onto plasterboard?

No.

Whether using the single-stud configuration or the extension arms, the SMWM40 must be securely attached to suitable structural support.

It must not be mounted directly to plasterboard/drywall alone.

1️⃣6️⃣ Can it be installed onto brick or concrete?

Yes.

The SMWM40 can be installed onto suitable solid concrete or masonry walls using appropriate fixings.

The wall must be structurally capable of supporting the combined load of the television and motorised mount.

1️⃣7️⃣ Can I install the SMWM40 above any fireplace?

Not necessarily.

You must check the fireplace manufacturer’s required clearances and ensure the television and mount won’t be exposed to excessive heat.

The TV must also safely clear the mantel or fireplace surround throughout the complete movement of the mount.

1️⃣8️⃣ Do I need longer cables?

Potentially, yes.

Because the TV moves down and away from the wall, power, HDMI, aerial, network and other cables need enough free length to follow the complete movement.

Cables should be routed so they cannot stretch, pinch, snag or become trapped in the mechanism.

1️⃣9️⃣ How do I work out where my TV will sit when raised?

The final position depends on the installation height of the mount and the location of the VESA mounting holes on your television.

Measure from the TV’s VESA holes to the top and bottom edges of the screen before determining the final mounting position.

This will also help determine how much of the mechanism will be concealed behind the television.

2️⃣0️⃣ Is professional installation recommended?

Because the SMWM40 is a motorised moving mount supporting televisions up to 40kg, correct structural fixing, positioning, fireplace clearance and cable management are particularly important.

If you’re unsure about the wall structure or installation requirements, we recommend using a suitably experienced installer.