SF02 32″-40″+ Fixed TV Wall Mount

SureMount 32″–40″ Fixed TV Wall Mount (SF02)

The SureMount SF02 is a strong, reliable fixed TV wall mount designed for 32″–40″ TVs, with support for VESA mounting patterns from 200×200 mm up to 500×300 mm. This makes it suitable for a wide range of TV brands and models using the common mid-size mounting layouts.

With a low-profile 30 mm cable gap, the SF02 keeps your TV close to the wall while still giving you just enough room to route power and HDMI cables cleanly. The 588 mm wide backplate makes it easy to install onto standard New Zealand 600 mm timber or metal studs, and the universal mounting arms make alignment simple.

The SF02 comes with a full hardware kit for both the wall and the TV, making it installer-friendly and ideal for bedrooms, offices, lounges, and commercial displays.

---

🔧 Installer’s Tip — Improve Viewing Angle and Cable Access

Professional installers often add a small spacer or washer behind the TOP mounting holes (on the TV-side bracket).
This creates a very slight forward tilt — only a few degrees — and provides three major benefits:

• Better viewing angle

If your TV is mounted higher than eye level (common in bedrooms or above cabinets), this gentle forward angle improves visibility and reduces glare.

• Better cable access & connector protection

Slim mounts sit close to the wall, leaving little room for bottom HDMI/power ports.
A small forward angle provides:

• extra clearance for cables

• reduced strain on HDMI/power connectors

• easier connection of new devices

• Cleaner overall finish

By relieving pressure on cables, the TV sits more comfortably on the bracket while still looking flat and even from the front.

This is a standard, safe, and widely used installer technique — especially helpful with slim fixed mounts like the SFSS01, SFSS03, SFSS05, SL1 and other low-profile SureMount models.

---

🟨 Key Features

✔ Fits most 32″–40″ TVs (up to 45 kg)
✔ Supports VESA patterns from 200×200 mm to 500×300 mm
✔ Low-profile design with a 30 mm cable gap
✔ 588 × 230 mm backplate — ideal for New Zealand 600 mm timber or steel studs
✔ Universal design with side-to-side arm adjustment
✔ Strong steel construction for long-term durability
✔ Full mounting kit included for wall and TV attachment
✔ Compatible with the SFSS01 if you require an even slimmer 24 mm profile

Installation Manual for SF02 Fixed TV Wall Mount:

SF02 Manual

Measurements for SF02 Fixed TV Wall Mount:

SF02-Measurements

FAQ’s — SureMount SF02 Fixed TV Wall Mount

1️⃣ How do I know whether the SF02 will work with my TV?

Check two things:

Weight: Your TV must be 45 kg or less
VESA pattern: Must be between 200×200 mm and 500×300 mm

If both match, the SF02 is compatible.

---

2️⃣ Should I choose a tilt mount or a fixed mount?

Choose a fixed mount like the SF02 if you want:

• a slim, tidy appearance

• minimal side-on visibility

• a strong, simple mounting solution

Choose a tilt mount if you need:

• easier access to rear ports

• downward tilt for high-mounted TVs

• help reducing glare

---

3️⃣ Does the SF02 work with metal wall studs?

Yes — it is designed for both timber and metal 600 mm studs commonly found in New Zealand homes.

However, many people are hesitant to drill into steel studs because:

• they are thinner than timber

• normal screws aren’t suitable without proper fixings

• incorrect installation may reduce load capacity

When installed with correct fasteners, the SF02 is strong and safe on metal studs.
If unsure, SureMount recommends hiring a qualified installer.

---

4️⃣ How far will my TV sit from the wall?

The SF02 positions your TV 30 mm from the wall, giving:

• enough space for cable routing

• easy power/HDMI access

• neat appearance with minimal gap

If you want a slimmer profile (24 mm or even 10 mm), consider the SFSS01 or SL1.

---

5️⃣ What comes in the box?

You’ll receive:

• Full mounting kit for wall and TV

• Bolts, spacers, washers

• Universal mounting arms

• Installation instructions

Everything needed for installation is included.