How do I know if my projector will fit on this SureMount Projector Mount?

Check these four factors: • Weight: Your projector must be 15 kg or less. • Ceiling-mountable: Ensure the projector supports inverted mounting. • Mounting hole pattern: – Standard arm reach up to 320 mm – With large extension legs up to 380 mm – Square pattern reach: 220 mm (standard) or 260 mm (extension legs) • Drop height: Make sure your projector’s throw ratio suits a 500–770 mm mounting range.

Is the SPM02W suitable for sloped ceilings?

Yes. The ceiling plate can tilt up to 45°, allowing the mount to be installed on angled or sloped ceilings commonly found in homes, halls, and commercial buildings.

How does the SPM03B compare to your other projector mounts?

• SPM01B: Fixed height, low-profile mount • SPM02B: Short–medium drop (300–440 mm) • SPM03B: Medium drop (500–770 mm) • SPM04B: Medium–high drop (700–1170 mm) • SPM05B: Long drop (1000–1970 mm) for high ceilings and large spaces

Can I adjust the projector angle once installed?

Yes — the mount provides ±30° projector tilt and 45° ceiling plate tilt, giving you plenty of flexibility to align the image perfectly.

Does this mount include cable management?

Yes. The SPM03B features integrated internal cable management, helping keep power and HDMI cables neat and hidden inside the column.

What comes in the box?

You receive a full mounting kit, which includes ceiling fixings, projector screws, adjustable arms, hardware, and cable-management components.

Does the mount work with all projector brands?

It fits 95% of all DLP and LCD projectors, thanks to its universal arm design and generous mounting-hole reach.

Can this mount be used for devices other than projectors?

Often yes. As long as the mounting-hole pattern matches, the SPM02W can support: • Security cameras • Wireless access points (WAPs) • Small monitors • Dental-surgery screens Compatibility depends entirely on hole spacing.

SPM03B 500mm-770mm Projector Mount Black

SPM03 500mm-770mm Projector Mount Measurements

Projector Leg Spread Large 260mm in Square Pattern

Adjustable Ceiling Projector Mount – 500–770mm Drop (SPM03B)

$194.50 (Incl GST-NZD)

Adjustable ceiling projector mount with 500–770mm drop, ±30° tilt, and 45° ceiling angle support. Ideal for higher ceilings and flexible installations.

16 in stock

Compare

SureMount Adjustable Ceiling Projector Mount – 500–770mm Drop (SPM03B)

The SureMount SPM03B is an adjustable ceiling projector mount designed for installations where additional drop and flexibility are required.

Building on the simplicity of the SPM01B, this model adds adjustable height and ceiling angle compatibility, making it ideal for sloped ceilings, higher ceilings, and more complex installations.

With a drop range of 500mm to 770mm, the SPM03B allows you to position your projector at the optimal height, while the adjustable ceiling plate ensures a secure installation even on angled surfaces.

Also available in black (SPM03W)

🟨 Key Features

📽 Universal Projector Compatibility
Fits approximately 95% of LCD and DLP projectors.

📏 Adjustable Drop: 500–770mm
Set the projector height to suit your room and screen setup.

🏠 Sloped Ceiling Compatible (Up to 45°)
Adjustable ceiling plate allows installation on angled ceilings.

🔄 Projector Tilt Adjustment ±30°
Makes image alignment quick and easy.

🏋️ 15kg Load Capacity
Strong and reliable support for most projectors.

🧩 Flexible Arm Configuration (3 or 4 Arm)
Adjustable mounting arms suit a wide range of projector hole patterns.

📐 Projector Arm Spread Up to 320mm
Expandable to 380mm with optional extension legs.

🧵 Integrated Cable Management
Keeps cables tidy and hidden for a professional finish.

🧱 Adjustable Ceiling Mount Design
Provides more flexibility than fixed mounts for varied installations.

🎨 Available in Black or White
Match your ceiling or projector for a clean finish.

🛠 Durable Aluminium Construction
Lightweight yet strong for long-term reliability.

📦 Complete Mounting Kit Included
Everything required for installation.

⚠️ Compatibility Note

Maximum load: 15kg
Drop range: 500–770mm
Ceiling angle: Up to 45°

👉 Suitable for both flat and sloped ceilings
👉 Ensure projector throw distance suits the selected drop height
👉 For very high ceilings, consider longer drop models (SPM04 / SPM05)

📄 Technical Documents

Product Manual: SPM02 SPM03 SPM04 SPM05 Manual
Measurements:SPM03_Measurements

🔍 Which Projector Mount Do I Need?

Model	Type	Mounting	Drop / Extension	Best For
SPM01	Fixed	Ceiling	135mm	Low ceilings
SPM02	Adjustable	Ceiling	300–440mm	Standard rooms
SPM03	Adjustable	Ceiling	500–770mm	Higher ceilings
SPM04	Adjustable	Ceiling	700–1170mm	High ceilings
SPM05	Adjustable	Ceiling	1000–1970mm	Very high ceilings
SPWM04	Adjustable	Wall	235–310mm	No ceiling access

❓ FAQs – Adjustable Ceiling Projector Mount (SPM03B)

1️⃣ Will this work with my projector?

It fits most projectors using adjustable arms.

Check:

Mounting hole pattern
Weight under 15kg

2️⃣ Can I install this on a sloped ceiling?

Yes.
The ceiling plate adjusts up to 45°, making it ideal for angled ceilings.

3️⃣ How much height adjustment does it have?

The projector drop can be adjusted between 500mm and 770mm.

4️⃣ Can I adjust the projector angle?

Yes.
The mount provides ±30° adjustment, making leveling easy.

5️⃣ When should I choose this mount over the SPM02B?

Choose the SPM03B if:

Your ceiling is higher
You need more drop than 440mm
You want more flexibility in projector positioning

6️⃣ Does it support different projector mounting patterns?

Yes.
The adjustable arms support both 3-arm and 4-arm configurations.

Weight	2 kg
Dimensions	40 × 19 × 7 cm
Projector Size	Fits 95% of 3 or 4 hole projectors available.
Maximum Weight	15kgs
Projector Arm Spread	Upto 320mm Can be extended to 380mm with SMPLB extension feet
Vertical Drop	500mm to 770mm