Fixed Ceiling Projector Mount – Low Profile (SPM01B)

SureMount Fixed Ceiling Projector Mount – Low Profile (SPM01B)

The SureMount SPM01B is a low-profile fixed ceiling projector mount designed for installations where the projector needs to sit close to the ceiling.

With an approximate 135mm drop from the ceiling to the projector mounting base, the SPM01B is ideal for home theatres, offices, classrooms and meeting rooms where additional height adjustment is not required.

The universal mounting system uses independently adjustable arms that can be configured for 3-point or 4-point projector mounting patterns, allowing it to suit a wide range of LCD and DLP projectors.

Once installed, the projector can be adjusted by up to ±30° to assist with levelling and image alignment, while the fixed-height design provides a simple, stable and unobtrusive installation.

Also available in white (SPM01W).

⭐ Key Features

📽️ Universal Projector Compatibility
Adjustable mounting arms suit a wide range of LCD and DLP projectors.

📏 Low-Profile 135mm Drop
Approximately 135mm from the ceiling to the projector mounting base, keeping the projector close to the ceiling for a clean, unobtrusive installation.

🔄 Projector Angle Adjustment ±30°
Allows the projector position to be fine-tuned for accurate image alignment and levelling.

🏋️ 15kg Load Capacity
Provides strong and reliable support for most standard projectors.

🔧 Flexible 3 or 4 Arm Configuration
The independently adjustable mounting arms can be arranged to suit projectors with either three or four mounting points.

↔️ Projector Arm Spread Up to 320mm
Adjustable mounting arms accommodate a wide range of projector mounting-hole patterns.

➕ Expandable to 380mm with SMPLB Extension Feet
For projectors with wider mounting-hole spacing, the separately available SMPLB Projector Mount Extension Feet increase the maximum arm spread to 380mm.

🔌 Integrated Cable Management
Allows projector cabling to be routed neatly through the mount for a clean, professional installation.

📌 Fixed Ceiling Mount Design
Ideal where the ceiling height already suits the required projector position and adjustable drop is not required.

🎨 Available in Black or White
Choose the colour that best matches your projector, ceiling or installation.

🛠️ Solid Aluminium Construction
Lightweight yet strong for long-term reliability.

📦 Complete Mounting Kit Included
Supplied with the mounting hardware required for installation.

📐 Projector Compatibility

The SPM01B uses independently adjustable mounting arms rather than a fixed mounting-hole pattern, allowing it to accommodate a wide range of projector designs.

Before ordering, check:

• • Maximum projector weight: 15kg
  • Standard projector arm spread: Up to 320mm
  • With SMPLB Extension Feet: Up to 380mm
  • Mounting configuration: 3-point or 4-point
  • Projector mounting-hole positions: Must fall within the adjustable range of the mounting arms

For projectors requiring a wider mounting spread, the separately available SMPLB Projector Mount Extension Feet extend the maximum arm spread to 380mm.

Because the mounting arms can be independently positioned, they can accommodate a wide range of square, rectangular and irregular projector mounting-hole patterns.

📏 Dimensions

• Ceiling to projector mounting base: Approx. 135mm
• Overall mount height including mounting assembly: Approx. 156mm
• Ceiling mounting plate: 107 × 95mm
• Standard projector arm spread: Up to 320mm
• Maximum arm spread with SMPLB Extension Feet: Up to 380mm
• Maximum projector weight: 15kg

🔍 Which Projector Mount Do I Need?

Model	Type	Mounting	Drop / Extension	Best For
SPM01	Fixed	Ceiling	Approx. 135mm	Low ceilings
SPM02	Adjustable	Ceiling	300–440mm	Standard rooms
SPM03	Adjustable	Ceiling	500–770mm	Higher ceilings
SPM04	Adjustable	Ceiling	700–1170mm	High ceilings
SPM05	Adjustable	Ceiling	1000–1970mm	Very high ceilings
SPWM04	Adjustable	Wall	255–330mm	Where ceiling mounting isn’t suitable

The SPM01 is the best choice when the projector needs to sit close to the ceiling and no height adjustment is required.

For installations requiring additional drop or installation onto a sloped ceiling, choose one of the adjustable SPM02, SPM03, SPM04 or SPM05 ceiling mounts.

If ceiling mounting isn’t practical, the SPWM04 provides an adjustable wall-mounted alternative.

📄 Technical Documents

Product Manual: SPM01 Manual

Measurements: SPM01_Measurements

Datasheet: SureMount_SPM01_Datasheet

❓ FAQs – Fixed Ceiling Projector Mount (SPM01B)

1️⃣ Will the SPM01B fit my projector?

The SPM01B uses independently adjustable mounting arms and is compatible with a wide range of LCD and DLP projectors.

Your projector must weigh 15kg or less, and its mounting holes must fall within the adjustable range of the mounting arms.

The standard arms provide a spread of up to 320mm, which can be increased to 380mm with optional extension legs.

2️⃣ Does my projector need four mounting holes?

No.

The SPM01B can be configured using either three or four mounting arms, allowing it to suit projectors with different mounting arrangements.

3️⃣ How far does the projector sit below the ceiling?

The distance from the ceiling to the projector mounting base is approximately 135mm.

The complete mount measures approximately 156mm overall when the projector mounting assembly is included.

4️⃣ Can I adjust the height of the projector?

No.

The SPM01B is a fixed-height ceiling mount designed to keep the projector close to the ceiling.

If you need to adjust how far the projector hangs below the ceiling, consider the SPM02, SPM03, SPM04 or SPM05 adjustable ceiling mounts.

5️⃣ Can I adjust the projector angle?

Yes.

The projector mounting assembly provides up to ±30° of angle adjustment, allowing the projector to be levelled and aligned with the screen.

6️⃣ Can I install the SPM01B on a sloped ceiling?

The SPM01B is designed primarily for flat-ceiling installations.

For a sloped or angled ceiling, choose the SPM02, SPM03, SPM04 or SPM05, as these models incorporate an adjustable ceiling mounting plate that can accommodate angled ceilings.

7️⃣ When should I choose the SPM01B instead of an adjustable projector mount?

Choose the SPM01B when:

• The projector needs to sit close to the ceiling
• The ceiling height already provides the correct projector position
• Drop adjustment is not required
• You have a flat ceiling
• You want a simple, low-profile permanent installation

If additional drop is required, choose one of the adjustable SPM02–SPM05 models.

8️⃣ What if my projector mounting holes are wider than the standard arms can accommodate?

If your projector requires a wider mounting spread, the separately available SMPLB Projector Mount Extension Feet can be fitted to the SPM01B.

9️⃣ Are cables hidden inside the mount?

The SPM01B incorporates integrated cable management, allowing projector cables to be routed neatly through the mount for a cleaner finished installation.

🔟 Is the SPM01 available in white?

Yes.

The mount is available as the SPM01B in black and the SPM01W in white.