Adjustable Ceiling Projector Mount – 300–440mm Drop (SPM02W)

SureMount Adjustable Ceiling Projector Mount – 300–440mm Drop (SPM02W)

The SureMount SPM02W is an adjustable ceiling projector mount designed for installations where a modest amount of additional drop is required.

With an adjustable drop range of 300mm to 440mm, the SPM02W is ideal when a low-profile fixed mount such as the SPM01W doesn’t provide enough clearance, while still keeping the projector relatively close to the ceiling.

The adjustable ceiling plate is suitable for flat or sloped ceilings up to 45°, making it a versatile option for home theatres, offices, classrooms, meeting rooms and commercial installations.

The universal mounting system uses independently adjustable arms that can be configured for 3-point or 4-point projector mounting patterns, while ±30° projector angle adjustment allows the final position to be fine-tuned for accurate image alignment.

Also available in black (SPM02B).

---

⭐ Key Features

📽️ Universal Projector Compatibility
Independently adjustable mounting arms suit a wide range of LCD and DLP projectors.

📏 Adjustable 300–440mm Drop
Set the projector height within the adjustable range to suit your ceiling height and projection setup.

🏠 Flat or Sloped Ceiling Installation
The adjustable ceiling plate allows installation on flat ceilings or sloped ceilings with an angle of up to 45°.

🔄 Projector Angle Adjustment ±30°
Allows the projector position to be fine-tuned for accurate image alignment and levelling.

🏋️ 15kg Load Capacity
Provides strong and reliable support for most standard projectors.

🔧 Flexible 3 or 4 Arm Configuration
The independently adjustable mounting arms can be arranged to suit projectors with either three or four mounting points.

↔️ Projector Arm Spread Up to 320mm
Adjustable mounting arms accommodate a wide range of projector mounting-hole patterns.

➕ Expandable to 380mm with SMPLW Extension Feet
For projectors with wider mounting-hole spacing, the separately available SMPLW Projector Mount Extension Feet increase the maximum arm spread from 320mm to 380mm.

🔌 Integrated Cable Management
Allows projector cabling to be routed neatly through the mount for a clean, professional installation.

🎨 Available in Black or White
Choose the colour that best matches your projector, ceiling or installation.

🛠️ Durable Aluminium Construction
Solid extruded aluminium construction provides strength while keeping the mount relatively lightweight.

📦 Complete Mounting Kit Included
Supplied with mounting hardware for installation to the ceiling and projector.

---

📐 Projector Compatibility

The SPM02W uses independently adjustable mounting arms rather than a fixed mounting-hole pattern, allowing it to accommodate a wide range of projector designs.

Before ordering, check:

• Maximum projector weight: 15kg
• Standard projector arm spread: Up to 320mm
• With SMPLW Extension Feet: Up to 380mm
• Mounting configuration: 3-point or 4-point
• Projector mounting-hole positions: Must fall within the adjustable range of the mounting arms

Because the mounting arms can be independently positioned, they can accommodate a wide range of square, rectangular and irregular projector mounting-hole patterns.

For projectors requiring a wider mounting spread, the separately available SMPLW Projector Mount Extension Feet increase the maximum arm spread to 380mm.

---

📏 Installation & Adjustment

• Adjustable drop: 300–440mm
• Maximum projector weight: 15kg
• Ceiling angle: Up to 45°
• Projector angle adjustment: ±30°
• Standard projector arm spread: Up to 320mm
• Maximum arm spread with SMPLW Extension Feet: Up to 380mm
• Mounting configuration: 3 or 4 arm
• Ceiling type: Flat or sloped
• Construction: Extruded aluminium

When selecting the installation height, ensure the chosen drop is suitable for the projector’s required position and throw distance.

---

🔍 Which Projector Mount Do I Need?

The SPM02 is the first adjustable-drop model in the SureMount ceiling projector mount range. It’s a good choice when the approximately 135mm fixed drop of the SPM01 is too short but a long extension isn’t required.

If you require more than 440mm of drop, the SPM03 provides a 500–770mm range, with the SPM04 and SPM05 providing progressively longer extension.

If ceiling mounting isn’t practical, the SPWM04 provides an adjustable wall-mounted alternative.

---

📄 Technical Documents

📘 Product Manual: SPM02 SPM03 SPM04 SPM05 Manual

📐 Measurements: SPM02_Measurements

📄 Product Datasheet: SureMount_SPM02_Datasheet

---

❓ FAQs – Adjustable Ceiling Projector Mount (SPM02W)

1️⃣ Will the SPM02W fit my projector?

The SPM02W uses independently adjustable mounting arms and is compatible with a wide range of LCD and DLP projectors.

Your projector must weigh 15kg or less, and its mounting holes must fall within the adjustable range of the mounting arms.

The standard arms provide a spread of up to 320mm, which can be increased to 380mm using the separately available SMPLW Projector Mount Extension Feet.

2️⃣ Does my projector need four mounting holes?

No.

The SPM02W can be configured using either three or four mounting arms, allowing it to suit projectors with different mounting arrangements.

3️⃣ How far can the SPM02W hang below the ceiling?

The SPM02W provides an adjustable drop range of 300mm to 440mm.

This allows the projector height to be set during installation to suit the ceiling height, screen position and required projection setup.

4️⃣ Can I install the SPM02W on a sloped ceiling?

Yes.

The adjustable ceiling plate allows installation on flat or sloped ceilings up to 45°, making the SPM02W suitable for installations where a standard fixed ceiling plate would not sit correctly.

5️⃣ Can I adjust the projector angle?

Yes.

The projector mounting assembly provides up to ±30° of angle adjustment, allowing the projector to be levelled and aligned with the screen.

6️⃣ Can I adjust the height after the mount has been installed?

The SPM02W has a telescopic adjustable drop of 300–440mm.

The required height should be selected and securely set during installation. It is not intended as a mount that is routinely raised and lowered during normal use.

7️⃣ When should I choose the SPM02W instead of the SPM01W?

Choose the SPM02W when you need more drop than the fixed SPM01W provides, or when you need to install the projector on a sloped ceiling.

The SPM02W provides an adjustable 300–440mm drop, compared with the SPM01W‘s approximately 135mm fixed drop.

8️⃣ What if I need more than 440mm of drop?

Choose the SPM03W if you require additional extension.

The SPM03W provides an adjustable drop range of 500–770mm.

For higher ceilings, the SPM04W provides 700–1170mm, while the SPM05W provides 1000–1970mm for very high ceilings.

9️⃣ What if my projector mounting holes are wider than the standard arms can accommodate?

If your projector requires a wider mounting spread, the separately available SMPLW Projector Mount Extension Feet can be fitted to the SPM02W.

The SMPLW extension feet increase the maximum arm spread from 320mm to 380mm.

🔟 Does the SPM02W have cable management?

Yes.

The SPM02W incorporates integrated cable management, allowing projector cabling to be routed neatly through the mount for a cleaner finished installation.

1️⃣1️⃣ Is the SPM02 available in black?

Yes.

The mount is available as the SPM02W in white and the SPM02B in black.